UO-D 2500 FU

Producer

The reverse osmosis unit is used for the desalination of softened water with a salinity of up to 1,000 mg/l. It is equipped with a high-quality centrifugal pump with variable-speed drive (VSD = FU). Frequency-controlled operation reduces electricity cost by 30 - 50 %, extends the lifespan of the unit and keeps permeate production constant irrespective of operation pressure. The RO digital microprocessor controller enables fully automatic operation with logging of all relevant operating data and freely adjustable limit values. The unit can be connected to the central control system via optional interfaces.

Benefits

  • Equipment with VSD (FU) saves 30 - 50 % electricity cost, maintains permeate production constant and enables a longer lifespan as well as particularly quiet operation
  • Versatile RO digital controller with logging of operation data and many parametrisation options
  • Optionally equipped with PLC Siemens S7-1200

Applications

  • Desalination of softened water
  • Suitable for all industrial applications
  • Suitable for reduction of electricity cost

Controller :
RO digital (PLC optional)
Desalination rate min.:
97 %
Permeate recovery:
75 – 80 %
Permeate back pressure max.:
0.3 bar
pH value operation:
6.5 – 9.5
pH value cleaning:
2 – 12
Ambient temperature:
5 – 40 °C
Conditions of use:
The unit may only be used for the desalination of softened feed water with drinking water quality or appropriately pre-treated well or surface water. The unit is designed for a salinity (TDS) of 1,000 mg/l and a temperature of 15 °C. Under these conditions, the projected permeate output is achieved even after three years of operation. The permeate yield depends on the raw water quality and the pre-treatment. The following parameters must be maintained in the feed water:
Free chlorine:
not detectable
Iron (Fe):
< 0.2 mg/l
Manganese (Mn):
< 0.05 mg/l
Silica (SiO2):
< 25 mg/l
Silt density index (SDI):
< 3
Feed water temperature:
5 – 35 °C
Feed water pressure:
2 – 6 bar
Pressure fluctuation:
± 0.5 bar
 
 
Enquire for more information
Product name / Permeate l/h
UO-D 2500 FU
Mains connection kW / V / Hz
3.0 / 3 x 380 - 500 / 50 - 60
Hydraulic connection feed / permeate / conc.
DN 32 / DN 25 / DN 25
Dimensions in mm W x D x H
2,480 x 710 x 1,650

Standard options


  • limitron 1''

    limitron 1''

    Click on the image to show all articles of this series.

     
  • PR II 3500/24

    PR II 3500/24

    The permeate recirculation PR prevents water with increased conductivity from reaching the consumer when the RO is started up.

     
  • KSE 3500/24

    KSE 3500/24

    The concentrate flushing device KSE displaces concentrate with feed water when the RO is shut down.

     
  • ARA DN 25

    ARA DN 25

    The ARA connection set is used to connect a manual cleaning system MRA to the RO.

     

Accessories


  • MRA 200

    MRA 200

    The unit is used for manual cleaning of RO membranes.

     
  • VIM

    VIM

    Manual measurement device for determination of silt density index (SDI)

     
  • Profinet (> 500 l/h)

    Profinet (> 500 l/h)

    Click on the image to show all interface variants for the RO digital controller.

     
  • Back-up / alternating / parallel operation

    Back-up / alternating / parallel operation

    Click on the image to show all options for back-up/alternating/parallel operation.

     

Customised versions


  • PLC for RO units

    PLC for RO units

    A PLC Siemens S7-1200 can be selected instead of the RO digital controller.