UO-D 120 - 500 C Reverse osmosis units with simplex softener

Producer

The ready-to-connect combi unit includes a pre-filter, a backflow preventer, a simplex water softener, a limitron hardness control device and a reverse osmosis unit with cover. It is used for the desalination of water with a salinity of up to 1,000 mg/l and is equipped with a compact rotary vane pump. The RO digital microprocessor controller enables fully automatic operation with logging of all relevant operating data and freely adjustable limit values. The unit can be connected to the central control system via an optional Profinet interface.

Benefits

  • Complete pre-treatment integrated, can be connected directly to the drinking water network
  • Simple installation on site with only four connection points (drinking water, permeate, waste water, socket)
  • Beautifully designed reverse osmosis cover
  • Versatile RO digital controller with logging of operation data and many parametrisation options

Applications

  • Discontinuous water softening and desalination
  • Suitable for all commercial and industrial applications with discontinous water demand (e.g. nightly shut-down)

Controller :
RO digital
Desalination rate min.:
97 %
Permeate recovery:
75 – 80 %
Permeate back pressure max.:
0.3 bar
pH value operation:
6.5 – 9.5
pH value cleaning:
2 – 12
Ambient temperature:
5 – 40 °C
Conditions of use:
The unit may only be used for the desalination of feed water with drinking water quality or appropriately pre-treated well or surface water. The unit is designed for a salinity (TDS) of 1,000 mg/l and a temperature of 15 °C. Under these conditions, the projected permeate output is achieved even after three years of operation. The permeate yield depends on the raw water quality and the pre-treatment. The following parameters must be maintained in the feed water:
Free chlorine:
not detectable
Iron (Fe):
< 0.2 mg/l
Manganese (Mn):
< 0.05 mg/l
Silica (SiO2):
< 25 mg/l
Silt density index (SDI):
< 3
Feed water temperature:
5 – 35 °C
Feed water pressure:
3 – 6 bar
Pressure fluctuation:
± 0.5 bar
 
 
Enquire for more information
please weait… Your data is being loaded...

Article no. Product name /
Permeate l/h
Mains connection
kW / V / Hz
Hydraulic connection
feed / permeate / conc.
Dimensions in mm
W x D x H
00420211 UO-D 120 C
Single article
UO-D 120 C 0.55 / 230 / 50 DN 20 / DN 10 / HT 50 1,130 x 780 x 1,520
00420212 UO-D 300 C
Single article
UO-D 300 C 0.55 / 230 / 50 DN 20 / DN 10 / HT 50 1,130 x 780 x 1,520
00420213 UO-D 500 C
Single article
UO-D 500 C 0.55 / 230 / 50 DN 20 / DN 10 / HT 50 1,130 x 780 x 1,520
Click on single article to find accessories, options and downloads.