The ultrapure water unit is used to produce diluate with a typical conductivity < 0.2 μS/cm by treating reverse osmosis permeate via electrodeionisation (EDI). It is equipped with high quality EDI modules and a Siemens LOGO! controller.
Benefits
Diluate with typical conductivity < 0.2 μS/cm
Prepared for direct connection to an RO unit
Piping in PP
Applications
For further demineralisation of RO permeate
For pharmaceutical or laboratory applications, power plants and microelectronics
Controller :
PLC Siemens Logo
Resistance diluate without CO2 binding:
5 MΩ x cm
Resistance diluate with CO2 binding:
10 MΩ x cm
Recovery:
90 – 95 %
Diluate backpressure max.:
1.0 bar
Ambient temperature:
5 - 40 °C
Conditions of use:
The unit is designed for a permeate conductivity of 4-20 µS/cm, a CO2 concentration of 10 mg/l and free diluate discharge. The feed water must be softened (< 0.05 °dH) and treated via a reverse osmosis unit without a permeate buffer. The diluate quality depends on the permeate quality. In addition, the following parameters must be maintained in the feed water: